Original: $53.99
-65%$53.99
$18.90The Story
The Kuchelmeister MultiClamp Tool is a precision material clamp designed for modern dubbing-loop and composite-loop fly tying. Built to grip a wide, straight swath of fibers at once, it helps you align CDC, hackle, marabou, flash, and guard hairs so they transfer cleanly into a loop without twisting or splaying. The rigid clamping faces and squared trimming edge make it easy to create consistent textures and repeatable profiles from one fly to the next.
Compared with narrow clips or pliers, the MultiClamp’s width and even pressure distribution let you prepare longer, uniform collars and bodies in fewer passes. If you like building translucent CDC collars, complex soft hackles, or brushy streamer heads with mixed materials, this tool streamlines the prep and improves results.
How to Use It
Lay your fibers on the bench with tips aligned, slide the MultiClamp over the bundle, and close it to capture the material. Trim along the clamp’s edge to create a clean working line, then open your dubbing loop, insert the trimmed edge into the loop, and release the clamp as you tension the thread. Spin to cord up the loop and wrap forward with controlled spacing. The flat clamping face keeps fibers parallel so they flare evenly when the loop is twisted.
For composite loops, layer materials in the clamp in the order you want them to emerge—flash nearest the trimmed edge for maximum pop, soft fibers behind for body, stiffer fibers last for support. Use light thread tension when inserting to avoid pulling fibers out of alignment, and brush the loop lightly after the first wrap to free trapped fibers.
Example Flies
CDC Soft Hackle: Use the MultiClamp to capture two small CDC feathers with tips aligned, trim the butts flush, and insert into a fine loop of 8/0 thread. Spin to form a sparse, mobile collar and wrap one to two turns behind a small thorax on a size 14–18 wet fly. The clamp’s wide bite keeps the CDC tips level so the fly pulses evenly on the swing.
Bubble Caddis: Align three CDC feathers in the clamp with a pinch of Antron for sparkle, trim and load into a loop, then wrap a tapered collar that props up a folded wing. This produces a buoyant, breathable shoulder on size 12–16 patterns that sits correctly in the film without bulky thread dams.
Composite-Loop Bugger: Stack marabou fibers, a few strands of flash, and a pinch of ice dub in the clamp, with the flash closest to the trimmed edge. After spinning, wrap a full, durable palmared body on a size 8–12 streamer. The clamp’s even pressure prevents clumps so you get a smooth, chenille-like body with lifelike movement.
Sculpin Brush Head: Capture squirrel tail guard hairs, UV dub, and a couple of barred rubber legs in layers inside the clamp. Insert into a strong gel-spun loop, spin, and build a short, dense head you can trim to a wedge. The controlled, repeatable profile helps your sculpin ride true and push water without clogging the hook eye.
Why We Like It
It saves time and elevates consistency. The MultiClamp’s broad, flat jaws help you make uniform collars and bodies, reducing do-overs caused by slipping fibers or uneven spread. It also makes complex material blends easy, so you can add movement and flash without losing control of proportions.
Durability and control stand out. Firm clamping pressure prevents creeping when you transfer fibers into the loop, and the crisp trimming edge yields clean starts that spin evenly. If you’re chasing a specific taper or density, the MultiClamp helps you reproduce it fly after fly.
Comparable Tools
Comparable tools include the Marc Petitjean Magic Tool set, the Swiss CDC MultiClamp, and Stonfo’s Dubbing Loop Clips. The Magic Tool excels at holding very fine, short fibers with interchangeable clip widths; the Swiss CDC version offers excellent grip with a long, straight edge for trimming; Stonfo’s clips are budget-friendly and nimble for small loops. The Kuchelmeister MultiClamp leans toward stability and a broad working face, making it especially good for longer collars, composite loops, and streamer heads where even pressure and alignment are critical.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
The Kuchelmeister MultiClamp Tool is a precision material clamp designed for modern dubbing-loop and composite-loop fly tying. Built to grip a wide, straight swath of fibers at once, it helps you align CDC, hackle, marabou, flash, and guard hairs so they transfer cleanly into a loop without twisting or splaying. The rigid clamping faces and squared trimming edge make it easy to create consistent textures and repeatable profiles from one fly to the next.
Compared with narrow clips or pliers, the MultiClamp’s width and even pressure distribution let you prepare longer, uniform collars and bodies in fewer passes. If you like building translucent CDC collars, complex soft hackles, or brushy streamer heads with mixed materials, this tool streamlines the prep and improves results.
How to Use It
Lay your fibers on the bench with tips aligned, slide the MultiClamp over the bundle, and close it to capture the material. Trim along the clamp’s edge to create a clean working line, then open your dubbing loop, insert the trimmed edge into the loop, and release the clamp as you tension the thread. Spin to cord up the loop and wrap forward with controlled spacing. The flat clamping face keeps fibers parallel so they flare evenly when the loop is twisted.
For composite loops, layer materials in the clamp in the order you want them to emerge—flash nearest the trimmed edge for maximum pop, soft fibers behind for body, stiffer fibers last for support. Use light thread tension when inserting to avoid pulling fibers out of alignment, and brush the loop lightly after the first wrap to free trapped fibers.
Example Flies
CDC Soft Hackle: Use the MultiClamp to capture two small CDC feathers with tips aligned, trim the butts flush, and insert into a fine loop of 8/0 thread. Spin to form a sparse, mobile collar and wrap one to two turns behind a small thorax on a size 14–18 wet fly. The clamp’s wide bite keeps the CDC tips level so the fly pulses evenly on the swing.
Bubble Caddis: Align three CDC feathers in the clamp with a pinch of Antron for sparkle, trim and load into a loop, then wrap a tapered collar that props up a folded wing. This produces a buoyant, breathable shoulder on size 12–16 patterns that sits correctly in the film without bulky thread dams.
Composite-Loop Bugger: Stack marabou fibers, a few strands of flash, and a pinch of ice dub in the clamp, with the flash closest to the trimmed edge. After spinning, wrap a full, durable palmared body on a size 8–12 streamer. The clamp’s even pressure prevents clumps so you get a smooth, chenille-like body with lifelike movement.
Sculpin Brush Head: Capture squirrel tail guard hairs, UV dub, and a couple of barred rubber legs in layers inside the clamp. Insert into a strong gel-spun loop, spin, and build a short, dense head you can trim to a wedge. The controlled, repeatable profile helps your sculpin ride true and push water without clogging the hook eye.
Why We Like It
It saves time and elevates consistency. The MultiClamp’s broad, flat jaws help you make uniform collars and bodies, reducing do-overs caused by slipping fibers or uneven spread. It also makes complex material blends easy, so you can add movement and flash without losing control of proportions.
Durability and control stand out. Firm clamping pressure prevents creeping when you transfer fibers into the loop, and the crisp trimming edge yields clean starts that spin evenly. If you’re chasing a specific taper or density, the MultiClamp helps you reproduce it fly after fly.
Comparable Tools
Comparable tools include the Marc Petitjean Magic Tool set, the Swiss CDC MultiClamp, and Stonfo’s Dubbing Loop Clips. The Magic Tool excels at holding very fine, short fibers with interchangeable clip widths; the Swiss CDC version offers excellent grip with a long, straight edge for trimming; Stonfo’s clips are budget-friendly and nimble for small loops. The Kuchelmeister MultiClamp leans toward stability and a broad working face, making it especially good for longer collars, composite loops, and streamer heads where even pressure and alignment are critical.
