Original: $5.99
-65%$5.99
$2.10The Story
Hareline Linguini Foam is a pre-cut, narrow, closed-cell foam strip designed for quick, consistent foam bodies and accents on terrestrials and attractors. Its linguini-like profile—long, rectangular, and slightly compressible—makes it ideal for segmented bodies, foam “sandwiches,” and clean, repeatable silhouettes without the tedium of slicing sheet foam into uniform widths.
Because the width is dialed for trout-sized terrestrials, it builds buoyant yet balanced profiles on hooks in the 8–14 range. The foam is flexible enough to cinch down for neat segment transitions, resists tearing better than brittle sheets, and comes in practical earth tones plus hi-vis colors for sighters and hot spots.
How to Use It
Secure a strip at the bend with two light pinch wraps, then increase tension as you advance, creating spaced compression wraps to form clean segments. A tiny drop of thin superglue between stacked layers locks in “foam sandwich” bodies without bulk. For hoppers or Chubbies, tie one strip on top and one below, add a sparse dubbed thorax, then bind the foam down again at the head. Trim to a gentle taper with fine scissors, and color the segments with waterproof markers for mottling. The material pairs well with polypropylene or Widow’s Web wings and barred rubber legs.
Keep thread pressure firm but controlled—140D or gel-spun makes neat, flat wraps that won’t cut the foam. When making extended bodies, bind the strip to a needle or mono loop, segment forward, add a drop of glue, and transfer to the hook. A brief pass near (not in) a lighter’s flame can round square edges for beetles, but go sparingly to avoid shrinking. UV resin topcoats on wear points (like the head tie-in) extend the fly’s life without killing float.
Example Flies
Chubby Chernobyl: Use two Linguini Foam strips (e.g., tan over purple) on a size 10–12 wide-gap hook. Tie the rear segment at the bend, add a white or chartreuse poly wing, sparse ice dub thorax, and barred round rubber legs at the mid and front tie-downs. The pre-cut width keeps the body symmetrical so the fly rides true and easily suspends a 2.5–3.5 mm tungsten dropper in rough pocket water.
Morrish Hopper: Build the abdomen with a single Linguini strip segmented forward over a dubbed underbody on a size 8–10 long-shank hook. Notch a small V in the tail end for realism, add a deer hair or poly wing, and bind a second short foam tab at the head for the thorax cap. A light marker mottling on tan foam plus mono rib makes a durable, high-floating hopper that still lands softly.
Fat Albert: Stack two contrasting Linguini strips (e.g., black over tan) to create a buoyant foam sandwich on a size 8–12 2XL nymph hook. Add splayed rubber legs at the thorax and a short flash or Widow’s Web wing for visibility. The narrow strip width keeps the pattern from getting blocky, so it punches through wind, stays upright, and remains visible among glare and foam lines.
Why We Like It
Pre-cut consistency saves time, trims guesswork, and delivers uniform bodies that track straight. The strip width suits the most-used trout sizes, building buoyant profiles without the clunky bulk you get from wider sheet foam. It takes marker well, glues cleanly, and the slight stretch lets you torque down for crisp segments without tearing.
On the water, flies tied with Linguini Foam float long, recover after fish, and carry a tungsten dropper without needing half a bottle of floatant. For guides and high-volume tiers, it’s a fast, repeatable way to produce durable hoppers, beetles, and attractors that stay in the film where fish actually eat them.
Comparable Materials
Wapsi Thin Fly Foam (1–2 mm sheets) covers more sizes and shapes but requires cutting your own strips; it’s versatile, yet slower and less uniform for production tying. Hareline Fettuccine Foam is the wider sibling—great for big hoppers, stoneflies, and bass bugs—while Linguini handles the medium trout range with cleaner proportions. Foam cylinders (Wapsi/Rainy’s) excel for ants and beetles with rounded profiles, but they’re less adaptable for long, flat bodies. Rainy’s colored foam sheets are durable and vibrant, though you’ll be matching widths by hand, which can introduce bulk or asymmetry compared to Linguini’s ready-to-tie strips.
Description
Hareline Linguini Foam is a pre-cut, narrow, closed-cell foam strip designed for quick, consistent foam bodies and accents on terrestrials and attractors. Its linguini-like profile—long, rectangular, and slightly compressible—makes it ideal for segmented bodies, foam “sandwiches,” and clean, repeatable silhouettes without the tedium of slicing sheet foam into uniform widths.
Because the width is dialed for trout-sized terrestrials, it builds buoyant yet balanced profiles on hooks in the 8–14 range. The foam is flexible enough to cinch down for neat segment transitions, resists tearing better than brittle sheets, and comes in practical earth tones plus hi-vis colors for sighters and hot spots.
How to Use It
Secure a strip at the bend with two light pinch wraps, then increase tension as you advance, creating spaced compression wraps to form clean segments. A tiny drop of thin superglue between stacked layers locks in “foam sandwich” bodies without bulk. For hoppers or Chubbies, tie one strip on top and one below, add a sparse dubbed thorax, then bind the foam down again at the head. Trim to a gentle taper with fine scissors, and color the segments with waterproof markers for mottling. The material pairs well with polypropylene or Widow’s Web wings and barred rubber legs.
Keep thread pressure firm but controlled—140D or gel-spun makes neat, flat wraps that won’t cut the foam. When making extended bodies, bind the strip to a needle or mono loop, segment forward, add a drop of glue, and transfer to the hook. A brief pass near (not in) a lighter’s flame can round square edges for beetles, but go sparingly to avoid shrinking. UV resin topcoats on wear points (like the head tie-in) extend the fly’s life without killing float.
Example Flies
Chubby Chernobyl: Use two Linguini Foam strips (e.g., tan over purple) on a size 10–12 wide-gap hook. Tie the rear segment at the bend, add a white or chartreuse poly wing, sparse ice dub thorax, and barred round rubber legs at the mid and front tie-downs. The pre-cut width keeps the body symmetrical so the fly rides true and easily suspends a 2.5–3.5 mm tungsten dropper in rough pocket water.
Morrish Hopper: Build the abdomen with a single Linguini strip segmented forward over a dubbed underbody on a size 8–10 long-shank hook. Notch a small V in the tail end for realism, add a deer hair or poly wing, and bind a second short foam tab at the head for the thorax cap. A light marker mottling on tan foam plus mono rib makes a durable, high-floating hopper that still lands softly.
Fat Albert: Stack two contrasting Linguini strips (e.g., black over tan) to create a buoyant foam sandwich on a size 8–12 2XL nymph hook. Add splayed rubber legs at the thorax and a short flash or Widow’s Web wing for visibility. The narrow strip width keeps the pattern from getting blocky, so it punches through wind, stays upright, and remains visible among glare and foam lines.
Why We Like It
Pre-cut consistency saves time, trims guesswork, and delivers uniform bodies that track straight. The strip width suits the most-used trout sizes, building buoyant profiles without the clunky bulk you get from wider sheet foam. It takes marker well, glues cleanly, and the slight stretch lets you torque down for crisp segments without tearing.
On the water, flies tied with Linguini Foam float long, recover after fish, and carry a tungsten dropper without needing half a bottle of floatant. For guides and high-volume tiers, it’s a fast, repeatable way to produce durable hoppers, beetles, and attractors that stay in the film where fish actually eat them.
Comparable Materials
Wapsi Thin Fly Foam (1–2 mm sheets) covers more sizes and shapes but requires cutting your own strips; it’s versatile, yet slower and less uniform for production tying. Hareline Fettuccine Foam is the wider sibling—great for big hoppers, stoneflies, and bass bugs—while Linguini handles the medium trout range with cleaner proportions. Foam cylinders (Wapsi/Rainy’s) excel for ants and beetles with rounded profiles, but they’re less adaptable for long, flat bodies. Rainy’s colored foam sheets are durable and vibrant, though you’ll be matching widths by hand, which can introduce bulk or asymmetry compared to Linguini’s ready-to-tie strips.
