The Story
Angler's Image Tippet Rings are ultra-small, seamlessly welded metal rings designed to eliminate the need for line-to-line knots between your leader and tippet. Measuring as small as 2mm to 3mm in diameter, these rings preserve the taper and length of your primary leader while allowing you to effortlessly attach a fresh section of tippet. These rings boast a high breaking strength that significantly outweighs their minimal mass, ensuring they do not compromise the integrity of heavy tippet sections during intense fights.
They are indispensable for Euro nymphing setups, dry-dropper rigs, and stillwater indicator fishing where frequent depth adjustments and tippet changes are necessary. Anglers fishing abrasive environments, like freestone rivers with heavy boulder structure, benefit immensely because the ring prevents the thicker leader material from being bitten into by thin fluorocarbon or monofilament tippet. Perfect for trout and steelhead anglers who want to extend the lifespan of their expensive extruded or furled leaders, these rings offer a smooth, round profile that passes through rod guides easily without catching.
How to Use Angler's Image Tippet Rings
To install an Angler's Image Tippet Ring, leave the rings on their wire snap-swivel holder to prevent dropping them into the river or on the tying desk. Tie the terminal end of your main leader directly to one ring using a standard clinch or Uni knot, then open the snap and slide the newly secured ring off the wire. Next, tie your desired length of tippet to the opposite side of the ring using the same secure knot.
When constructing dropper rigs, you can tie a second piece of tippet directly to the same ring, creating a 90-degree tag end for your nymph. For fly tying purposes, secure the ring to the rear of a streamer shank using tight thread wraps and superglue, providing a frictionless anchor point for articulation wire or trailing hook loops.
Why We Like It
We like Angler's Image Tippet Rings because they drastically reduce leader turnover and save money by preventing the continuous shortening of tapered leaders. Tying monofilament to fluorocarbon often results in the harder fluorocarbon cutting into the softer mono under tension; the smooth metal barrier completely eliminates this friction point and maintains maximum knot strength across mismatched line diameters. They are an exceptional choice for several specific applications:
- Connecting disparate line materials without compromising knot integrity.
- Creating precise 90-degree dropper tags for multi-nymph Euro rigs.
- Providing a lightweight articulation joint for custom streamer shanks.
The seamless construction ensures there are no sharp edges or burrs that could compromise light 6X or 7X tippets during a long fight with a heavy fish. Their stealthy black nickel finish minimizes underwater flash, preventing highly pressured fish from spooking in clear, slow-moving pools.
Angler's Image Tippet Rings vs Rio Tippet Rings
While both products provide a solid metal junction for leader construction, Angler's Image offers a slightly wider variety of shape options, including tear-drop profiles that help separate the leader from the dropper tag end more effectively than standard round rings. Rio Tippet Rings are typically forged with a slightly thicker gauge wire in their 2mm size, providing a marginally higher break strength but adding a microscopic amount of weight that can pull down highly buoyant dry flies, making Angler's Image a superior choice for delicate dry fly presentations.
Example Flies Using Tippet Rings
Articulated Trout Intruders: Tying an Angler's Image Tippet Ring to the back of a 20mm Waddington shank creates a frictionless loop point for trailing stinger hooks. The smooth metal surface prevents the articulation wire or braided backing from abrading against sharp shank edges when a large brown trout violently thrashes or rolls.
Micro Articulated Streamers: By lashing a 2mm tippet ring to the rear of the primary hook, tyers can easily attach a small size 14 trailing nymph hook using a short section of coated wire. This method keeps the overall profile incredibly slim compared to bulky bead-chain joints, allowing the fly to sink rapidly while retaining fluid, multi-segmented movement in the water column.
Description
Angler's Image Tippet Rings are ultra-small, seamlessly welded metal rings designed to eliminate the need for line-to-line knots between your leader and tippet. Measuring as small as 2mm to 3mm in diameter, these rings preserve the taper and length of your primary leader while allowing you to effortlessly attach a fresh section of tippet. These rings boast a high breaking strength that significantly outweighs their minimal mass, ensuring they do not compromise the integrity of heavy tippet sections during intense fights.
They are indispensable for Euro nymphing setups, dry-dropper rigs, and stillwater indicator fishing where frequent depth adjustments and tippet changes are necessary. Anglers fishing abrasive environments, like freestone rivers with heavy boulder structure, benefit immensely because the ring prevents the thicker leader material from being bitten into by thin fluorocarbon or monofilament tippet. Perfect for trout and steelhead anglers who want to extend the lifespan of their expensive extruded or furled leaders, these rings offer a smooth, round profile that passes through rod guides easily without catching.
How to Use Angler's Image Tippet Rings
To install an Angler's Image Tippet Ring, leave the rings on their wire snap-swivel holder to prevent dropping them into the river or on the tying desk. Tie the terminal end of your main leader directly to one ring using a standard clinch or Uni knot, then open the snap and slide the newly secured ring off the wire. Next, tie your desired length of tippet to the opposite side of the ring using the same secure knot.
When constructing dropper rigs, you can tie a second piece of tippet directly to the same ring, creating a 90-degree tag end for your nymph. For fly tying purposes, secure the ring to the rear of a streamer shank using tight thread wraps and superglue, providing a frictionless anchor point for articulation wire or trailing hook loops.
Why We Like It
We like Angler's Image Tippet Rings because they drastically reduce leader turnover and save money by preventing the continuous shortening of tapered leaders. Tying monofilament to fluorocarbon often results in the harder fluorocarbon cutting into the softer mono under tension; the smooth metal barrier completely eliminates this friction point and maintains maximum knot strength across mismatched line diameters. They are an exceptional choice for several specific applications:
- Connecting disparate line materials without compromising knot integrity.
- Creating precise 90-degree dropper tags for multi-nymph Euro rigs.
- Providing a lightweight articulation joint for custom streamer shanks.
The seamless construction ensures there are no sharp edges or burrs that could compromise light 6X or 7X tippets during a long fight with a heavy fish. Their stealthy black nickel finish minimizes underwater flash, preventing highly pressured fish from spooking in clear, slow-moving pools.
Angler's Image Tippet Rings vs Rio Tippet Rings
While both products provide a solid metal junction for leader construction, Angler's Image offers a slightly wider variety of shape options, including tear-drop profiles that help separate the leader from the dropper tag end more effectively than standard round rings. Rio Tippet Rings are typically forged with a slightly thicker gauge wire in their 2mm size, providing a marginally higher break strength but adding a microscopic amount of weight that can pull down highly buoyant dry flies, making Angler's Image a superior choice for delicate dry fly presentations.
Example Flies Using Tippet Rings
Articulated Trout Intruders: Tying an Angler's Image Tippet Ring to the back of a 20mm Waddington shank creates a frictionless loop point for trailing stinger hooks. The smooth metal surface prevents the articulation wire or braided backing from abrading against sharp shank edges when a large brown trout violently thrashes or rolls.
Micro Articulated Streamers: By lashing a 2mm tippet ring to the rear of the primary hook, tyers can easily attach a small size 14 trailing nymph hook using a short section of coated wire. This method keeps the overall profile incredibly slim compared to bulky bead-chain joints, allowing the fly to sink rapidly while retaining fluid, multi-segmented movement in the water column.
